1L & 5L Variant will take one week extra to be delivered.   The Auto Finesse® Dressle is a versatile all-purpose Car Trim Dressing for the exterior and interior trim and must have car detailing product. This liquid, dry touch water based dressing can be sprayed directly on to the surface or applied via an applicator or cloth depending on the area of the vehicle you are working on, and your personal preference. This highly versatile dressing is also great for dressing hard to reach areas such as wheel wells and engine bays, due to its spray on and walk away nature, simply dose the surface with a few fine mists of Dressle and leave to cure. Dressle is also a great product to enhance the appearance of the cockpit of your vehicle, as it dries to a non-sticky or greasy finish, it leaves a pleasant and natural sheen. The UV inhibitors help prevent interior surfaces from fading, and keeps a deep rich finish to your interior plastic and vinyl trim, it contains no waxes, oils, or petroleum distillates.   All-purpose dressing for exterior and interior trim A liquid, dry touch water based dressing UV inhibitors help prevent interior surfaces from fading Easy spray on and wipe formula Great for dressing hard to reach areas such as wheel wells and engine bays too Contains no waxes, oils, or petroleum distillates   How-To Use Dressle Step 1   Apply 1-2 spritz to a microfibre cloth and spread to form a even film on the surface.   Step 2   Alternatively for intricate grills, engine bays, or wheel wells apply by liberally spraying directly on to the surface, leave for 1-5 minutes before wiping away excess with a clean microfibre towel.   Step 3   For added sheen, apply multiple coats to achieve desired finish.   Product Code: DL500 / DL1L / DL5L

1L & 5L Variant will take one week extra to be delivered.   Developed to enhance water beading, protection and gloss quickly and efficiently during the wash stage, this advanced SiO2-based hydrophobic rinse aid has been engineered to bond instantly, leaving behind a glossy protective layer, and delivering an efficient 21st Century solution to applying a ceramic coating in a matter of seconds. There’s no need to significantly change your regular wash routine, either. Simply mist on a little Aqua Coat after rinsing away any contaminants during your contact or decontamination wash, and immediately rinse to coat your entire vehicle. SiO2-based ceramic coatings utilise silicon dioxide, which is commonly known as silica or quartz and the main ingredient you’ll find in glass and ceramic glazes. This natural chemical compound is capable of forming extremely strong chemical bonds with almost any surface to create a supremely hard barrier that’s impervious to moisture, grime, chemicals and environmental contamination. SiO2 protection is also extremely difficult to remove during normal day-to-day driving, the chief reason why ceramic coatings always offer the ultimate in durability. Deep down on a molecular level, the bonded SiO2 layer smooths out microscopic recesses in the surface to leave a perfectly level hydrophobic barrier that's completely smooth, this gives water, dirt and other foreign molecules nothing to cling onto. Because of these advanced properties, water will simply bead or run off the surface and particulates aren’t able to stick, this also stops potentially harmful contaminants from penetrating, guarding the more sensitive surfaces (such as paintwork and trim) from the onset of corrosion, oxidation and fading. Any surface that’s been protected with a coating will repel foreign contaminants, allowing them to either slide off or simply sit on top of the ceramic layer without being able to penetrate or bond, making the vehicle far easier to clean on the next maintenance wash. SiO2 coatings are also engineered to be perfectly clear, and this means that light is able to pass through unobstructed and then bounce back to the eye uniformly without diffracting in different directions, in a similar way to a car wax this gives the appearance of a significantly deeper, glossier surface. Safe on all exterior surfaces, including paintwork, trim, wheels and even vinyl wraps, Aqua Coat can be used as a stand-alone car detailing and valeting product to introduce an SiO2 coating, or as a quick and easy maintenance top up to prolong the life and performance of other Si02-based ceramic coatings, such as those in our flagship Caramics Protection range (including our Paintwork Protection Kit, Glass Protection Kit and Wheel Protection Kit). And remember, with Aqua Coat, a little always goes a long way, simply mist over the majority of the surface, and let your rising do the rest! Aqua Coat Hydrophobic Rinse Aid is also available in 500ml bottles, along with 5-Litre trade size containers. This product is ideal for use with our 1-Litre Pro Mixing Bottle.   How-To Use Aqua Coat Step 1   Thoroughly wash your vehicle and rinse prior to application.   Step 2   Apply a light, even coating of Aqua Coat to a wet vehicle.   Step 3   Rinse thoroughly and dry with a microfibre towel.   Product Code: AQU5 / AQC500 / AQC5L

With its extreme dirt-shifting ability, the Rubber Scrubber has been designed as the ultimate tyre brush for use during the wheel wash stages. Perfectly sculpted for tackling the task of heavy soil removal and deep-cleaning tyre sidewalls, this wet work essential features a specially developed curved head, ergonomic handle and super-stiff synthetic bristles capable of scrubbing away the hardiest contaminants on even the grimiest tyres.   The perfect partner for our Tread Tyre Cleaner, this handy cleansing tool has been specifically engineered to remove any surface salt and mud, along with ingrained grit and grime, even between awkward manufacturer markings and corner block treads. This makes the Rubber Scrubber the secret to keeping your tyres looking fresh - and fully preparing surfaces for your favourite tyre dressing - during every single detail.    150mm x 60mm 25mm stiff synthetic bristles Tough ABS construction 70mm x 60mm contoured scrubbing head Textured ergonomic handle    Product Code: TSB3

The new Auto Finesse FeatherTip Detailing Brushes - our softest ever detailing brushes. Designed to eliminate the risk of scratching and marring your most sensitive surfaces, this collection of ultra-premium detailing brushes feature super-supple, synthetic bristles ideal for detailing the most intricate areas, on both the inside and outside of your vehicle. Developed specifically for dusting and deep-cleaning delicate finishes, FeatherTips are safe to use on any surface and feature long, ergonomic handles enabling quick and easy access to the hardest-to-reach places. There’s also a range of four different sizes to ensure you have the right tool for the job every single time. Complete with our trademark teal collars - for easy identification in your car detailing kit - these are a master multi-tasker engineered to make light work of the riskiest jobs, including dry dusting and deep cleaning piano black, carbon fibre and soft leather trim. They’re also ideal for scratch-less detailing of delicate switches, stereo displays, gear gaiters and much more. On the outside of your vehicle you’ll find FeatherTips safe on all paintwork types, making them perfect for agitating pre-wash cleaners and snow foams around grilles, trims, window rubbers and emblems. These are also ideal for dry dusting the most awkward recesses and trim after using polish on paint or glass. Our ultimate brushes for your most sensitive parts. Dimensions: Large  Overall Length: 240mm Handle Length: 190mm Bristle Length: 50mm Bristle Diameter: 45mm Medium  Overall Length: 230mm Handle Length: 185mm Bristle Length: 45mm  Bristle Diameter: 40mm Small Overall Length: 220mm Handle Length: 175mm Bristle Length: 45mm Bristle Diameter: 35mm X Small  Overall Length: 210mm  Handle Length: 160mm Bristle Length: 50mm Bristle Diameter: 30mm    Product Code: TF4

A small but essential tool to aid in every machine polishing process, our Pad Cleaning Brush is designed for the quick, simple and safe removal of compound residues from all foam machine polishing pads. Constructed from rigid ABS plastic, designed to be tough enough to stand up to the rigours of day-to-day professional use, the Auto Finesse Pad Cleaning Brush features medium-stiff synthetic bristles to offer thorough surface contact and supreme deep-cleaning power, but without abrading or damaging the foam polishing face of your pad. Developed specifically for use with our collection of foam Revitalise V2 Polishing Pads and Revitalise Spot Pads, this specially-contoured cleaning brush is the perfect detailing accessory for the periodic dry-scrubbing of clogged pads during all machine polishing stages. Offering a quick and simple safety measure to ensure that excess polish and compound residues never interfere with the goal of obtaining the best possible finish.  The Pad Cleaning Brush is also ideal for the final cleaning required after carrying out your machine polishing. In conjunction with a 1:10 dilution of Verso All Purpose Cleaner, this product can be utilised for safely removing wet and dry compound residue to prolong the life, and the usefulness, of your pads.   Product Code: PCB